Sizing Information
 

It is very important that we receive accurate dimensions of the area that the graphics are to be
installed on. Let us know overall height and width available for desired lettering and we will
email you a proof before we cut graphics to ensure you will be satisfied with the results.

Height Width

Measure Usable Space for Graphics. We will determine sizing allowing for proportional border.

Please remember that certain fonts require more space for ascendors and descendors.
(Depending on whether upper or lowercase letters are used).

     All Registration Numbers must be a minimum of 3 inches tall. Length will vary based on size of boat, but
    keep in mind that as a rule of thumb Reg. Numbers will be anywhere from 17" to 28" in overall length.

    Hailing ports are required only on documented vessels (over 30' generally) and should be no less than 4" tall.

    Boat names can be cut up to 22" tall per line. We like to keep the name proportional to the size of the
    boat. The smaller the boat, the smaller the name.